Indication of the system status and the operation of the indicators are programmable and may not function as
above. Verify the operation with your installer.
Audible Tone
When a key is pressed, a short audible tone is generated. Other tones are generated when certain functions are
performed.
Confirmation Tone
When an operation (arming/disarming) has been successfully entered on the keypad, or when the system
switches to a new status/mode, the keypad generates a sequence of four audible tones.
Rejection Tone
When the system times out or when an operation is incorrectly entered, the keypad generates an audible tone for
three seconds.
If required, audible tones can be silenced by pressing and holding the
[CLEAR]
key for 3 seconds.
Keypad Functions
Key
Function
0-9
The numeric keys are used to enter user codes and select menus.
The
[ARM]
key is used to start the arming process for an area (see page 11).
The
[DISARM]
key is used to silence alarms, disarm the area, and cancel an arming sequence (see
The
[MENU]
key is used to access the menu and can be followed by menu shortcut selection key(s)
that represent a menu item.
The
[STAY]
key is used to initiate the stay arming process for an area (see page 12).
The
[FORCE]
key is used to force arm an area (see page 12).
The
[MEMORY]
key will take a user directly to the memory view menu (see page 14).
The
[BYPASS]
key can be pressed when a zone is breached during an arming process to bypass the
displayed zone (see page 13).
The
[CLEAR]
key will log off the user currently logged in to the keypad. When pressed while not
logged in the display will be refreshed.
ELT-KLCS | EliteSuite Touch Sense LCD Keypad | User Manual
7
