Bypassing Zones
Bypassing zones instructs the alarm system to ignore specified zones so that they will not cause alarms while
system is armed. For example, you may wish to bypass certain zones when workers are renovating part of your
establishment. Once the system is disarmed, the bypass settings are erased.
Bypassing Zones
1.
Press the
[BYPASS]
key, then enter your user code.
2.
Use the
[UP]
and
[DOWN]
keys to scroll to the zone you want to bypass.
3.
Press the
[BYPASS]
key to change the bypass status of the selected zone.
4.
Bypass as many zones as necessary.
5.
Press the
[ENTER]
key to store the bypass settings and exit.
6.
Press the
[CLEAR]
key to exit without making changes.
7.
Arm the area as normal.
To remove the bypass setting, select the zone again and press the
[BYPASS]
key. To remove all bypassed zones,
press the
[FORCE]
key.
Bypass Zone Recall
After disarming the system, the bypass entries are erased. The bypass recall feature reinstates the previous bypass
entries saved in memory. This eliminates the need to manually program the same bypass entries every time you
arm the system.
Recalling Bypasses
1.
Press the
[BYPASS]
key, then enter your user code.
2.
Press and hold the
[BYPASS]
key for two seconds to load the previous settings. You may change these
settings if required.
3.
Press the
[ENTER]
key to store the bypass settings and exit.
4.
Press the
[CLEAR]
key to exit without making changes.
5.
Arm the system as normal.
Fast Arming
You can fast arm the system in regular, force, stay or instant modes by holding the appropriate arming key for two
seconds. This arms the system without the need to enter a user code.
You can use the feature to allow service staff (e.g. cleaners) to arm the system without giving them access to any
other alarm system operations.
This feature must be enabled by your property manager or installation company.
ELT-KLCS | EliteSuite Touch Sense LCD Keypad | User Manual
13
