Panic Alarm
The EliteSuite system can provide three panic alarms that immediately generate an alarm after simultaneously
pressing and holding two specific buttons for three seconds. Based on your needs, these panic alarms can
generate audible alarms (sirens or bells) or silent alarms. The system will communicate specific messages to your
monitoring station or property manager.
⦁
Press and hold keys
[1]
and
[3]
for the panic alarm.
⦁
Press and hold keys
[4]
and
[6]
for a medical alarm.
⦁
Press and hold keys
[7]
and
[9]
for a fire alarm.
All panic alarms must be enabled by your property manager or installation company.
Fire Alarm
The EliteSuite system has versatile fire monitoring capabilities which may be included in your installation.
When a fire alarm occurs, the keypad will emit three audible tones at two-second intervals and immediately
contact the security monitoring station. It may also activate the alarm siren.
If the zone is a delayed fire zone, there is a delay of 30 seconds before the system contacts the security company
or property manager. This prevents unnecessary reporting of false alarms, allowing you to reset the fire alarm
before a report is sent. If there is no fire condition, contact your property manager or security company
immediately to avoid an unnecessary response.
Resetting the Fire Alarm
There are two actions required to reset the system after a fire alarm:
1.
Silence the alarm in the EliteSuite system by entering a
user code
at the keypad.
2.
Physically reset the smoke alarm by holding the
[CLEAR]
and
[ENTER]
keys together until you hear a
confirmation tone.
This is only required for some types of smoke alarm. Confirm with your property manager or security
installation company.
A delayed fire zone will be automatically canceled if the smoke detector is reset within 30 seconds. Pressing any
key on the keypad during the first 30 seconds will silence the alarm for 90 seconds.
ELT-KLCS | EliteSuite Touch Sense LCD Keypad | User Manual
21
