Stay Arming
This method allows you to remain in the protected area while partially arming the system. Stay zones are ignored
when the system is stay armed. For example, when you go to sleep at night you can arm doors and windows
without arming internal motion detectors.
Stay Arming your System
1.
Check that all zones that are not stay zones are closed and ready to arm.
2.
Press the
[STAY]
key then enter your user code.
3.
The exit delay will start.
To disarm the system, enter your user code as normal.
To fast stay arm the system without a user code, press and hold the
[STAY]
key for two seconds.
Switching From Stay to Regular/Force Armed
If you need to leave your premises and want to arm the system fully, use the fast exit arming method. Press and
hold the
[ARM]
or
[FORCE]
key for two seconds to activate the exit delay. When this finishes, all zones will be
armed.
Instant Arming
Instant arming is similar to stay arming, but if any monitored zone is opened the alarm will be activated
immediately (with no entry delay).
Instant Arming your System
1.
Check that all zones that are not stay zones are closed and ready to arm.
2.
Press the
[STAY]
key then enter your user code. The exit delay will start.
3.
Press and hold the
[STAY]
key for two seconds.
Force Arming
Force arming allows you to rapidly arm the system without waiting for all zones in the system to close. When the
system is force armed any zone that is currently open is ignored. The zone will be armed when it is next closed.
Force arming is commonly used when a motion detector is protecting the area occupied by a keypad. This allows
you to arm the area even when that zone is open.
Force Arming your System
1.
Check that all zones that are not force zones are closed and ready to arm.
2.
Press the
[FORCE]
key, then enter your user code.
3.
The exit delay will start.
To fast force arm your system without a user code, press and hold the
[FORCE]
key for two seconds.
ELT-KLCS | EliteSuite Touch Sense LCD Keypad | User Manual
12
