Arming/Disarming
To take full advantage of your system, familiarize yourself with the different arming methods.
Some arming methods must be enabled by your property manager or installation company. Confirm which
options are available in your system.
Arming
Arming the system activates monitoring of all zones, such as motion detectors, door contacts and window
contacts. If a zone is breached the system will activate the alarm and send a message to the monitoring station.
After entering a valid arming sequence the exit delay time will provide you with enough time to exit the protected
area before the system arms. The keypad will generate a beep-beep tone repeatedly during the exit delay period.
The tone will increase in frequency to indicate when only ten seconds remain.
If any zones are triggered after the end of the exit delay, the alarm will be activated.
Arming your System
1.
Check the system is ready to arm and all zones are closed (the Disarmed indicator is green).
2.
Enter your user code.
3.
The exit delay will start and you can now leave the premises.
Alternatively, you can fast arm the system without a user code by pressing and holding the
[ARM]
key.
This option must be enabled by your property manager or installation company.
Disarming
To disarm an armed system, enter your user code. This deactivates monitoring on all of the sensors so that you can
move around the area.
An entry point, like the front door, will be programmed with an
entry delay
time. When an entry point is opened
the keypad will emit a continuous audible tone until you disarm the system. If the timer elapses without the system
being disarmed, the alarm will be activated.
Disarming your System
1.
When you open the front door or other entry point, the entry delay time will start. The keypad will emit a
continuous audible tone.
2.
Enter your user code to disarm the system.
Deactivating an Alarm
Alarms can occur when someone enters the building through an unexpected entry path (e.g. through the
window), if the area is not disarmed during the entry delay, or if there is still someone in the area after the exit
delay. Your system may also have panic, medical and fire alarms available (see page 21).
To deactivate an alarm, enter your user code. This will also disarm the system.
ELT-KLCS | EliteSuite Touch Sense LCD Keypad | User Manual
11
