![background image](http://html2.mh-extra.com/html/ics/680gc/680gc_service-manual_3546494063.webp)
62
© 2011 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 525747 REV12Sep2012
680GC SERVICE MANUAL
16. FLYWHEEL
16.3
Screw on flywheel removal tool finger
tight. Unscrew tool 1 1/2 turns leaving
approximately 1/8 inch (5 mm) space
between tool and flywheel.
16.1
Insert piston stop.
16.2
Remove flywheel nut, wave washer, and plain
washer.
16. This section covers the removal, inspection, and installation of the flywheel. Removal of
the starter and spark plug is requried. Refer to sections 6 and 8 if necessary.