ICS 586MBH Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 48

ICS 586MBH Series Скачать руководство пользователя страница 9

Chapter 1: Introduction

Manual Number: 41209-004-1

Page 1-1

Chapter 1: Introduction

Thank you for your purchase of the 586MBH Series Industrial system board. The 586MBH Series
system board design was based on the Intel Triton™ chipset providing the ideal platform for get-
ting the most power of the Intel Pentium™ processor. With proper installation and maintenance,
your 586MBH Industrial will provide years of high performance and trouble free operation.

This manual provides a detailed explanation into the installation and use of the 586MBH Series
system board. This manual is written for the novice PC user/installer. However, as with any major
computer component installation, previous experience is helpful and should you not have prior
experience, it would be prudent to have someone assist you in the installation.

This manual is broken down into 2 chapters and 3 appendix.

Chapter 1 -

Introduction, System Board Configuration, Connecting Cables

This chapter provides all the necessary information for installing the 586MBH. Topics discussed
include: Installing the CPU (if necessary), DRAM installation, jumper settings for CPU, cache
and standard I/O. Connecting all the cables from the system board to the chassis and peripherals.

Chapter 2 -

BIOS Configuration

This chapter discusses the final step in getting your system up and running - running the BIOS
SETUP program.

Appendix A -

Technical Specifications

A complete listing of all the major technical specifications of the 586MBH is provided.

Appendix B -

Flash BIOS Programming

Instructions on updating your BIOS without having to replace the EPROM if the optional Flash
BIOS is installed.

Appendix C -

Troubleshooting

Provides information on the different stages of the Power-On Self Test

«
...
7
8
9
10
11
...
»

Содержание 586MBH Series

















































Отзывы:

Нет отзывов