ICS 586MBH Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 48

ICS 586MBH Series Скачать руководство пользователя страница 21

Chapter 1: Introduction

Manual Number: 41209-004-1

Page 1-13

FCC Compliance Statement for FCC Class A Devices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his or her own expense.

Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

Note:

The assembler of a personal computer system may be required to test the system and/or
make necessary modifications if a system is found to cause harmful interference or to be
non-compliant with the appropriate standards for its intended use.

How to remain CE Compliant

This device complies with CE Directives 72/23/EEC and EMC 89/336/EEC. CE compliance is
based on the interaction of all the components of a system. Any modifications made to the equip-
ment may affect the CE compliance and must be approved in writing by Industrial Computer
Source. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to claim CE compliance.

The Models 586MBH are designed to be CE Compliant when used in an CE compliant chassis.
Maintaining CE Compliance also requires proper cabling and termination techniques. The user is
advised to follow proper cabling techniques from sensor to interface to ensure a complete CE
Compliant system. Industrial Computer Source does not offer engineering services for designing
cabling or termination systems. Although Industrial Computer Source offers accessory cables and
termination panels, it is the user's responsibility to ensure they are installed with proper shielding
to maintain CE Compliance.

«
...
19
20
21
22
23
...
»

Содержание 586MBH Series

















































Отзывы:

Нет отзывов