ICS 586MBH Series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 48

ICS 586MBH Series Скачать руководство пользователя страница 26

Manual Number: 41209-004-1

Page 2-4

586MBH Manual

Advanced Setup

Advanced Setup options are displayed by choosing the Advanced icon from the WINBIOS Setup
main menu. All Advanced Setup options are described in this section.

Quick Boot

Set this option to Enabled to instruct AMIBIOS to boot quickly when the computer is powered on.
This option replaces the old Above 1 MB Memory Test Advanced Setup option. The settings are:
Enabled and Disabled.

The Optimal and Fail-Safe default settings are Enabled.

BootUp Sequence

This option sets the sequence of boot drives (floppy drive A:, hard disk drive C:, or a CD-ROM
drive) that the AMIBIOS attempts to boot from after AMIBIOS POST completes. The settings are
C:,A:,CDROM, or A:,C:, CDROM, CDROM,A:,C;.

The default settings are C:,A:,CDROM.

BootUp Num-Lock

Set this option to Off to turn the Num Lock key off when the computer is booted so you can use the
arrow keys on both the numeric keypad and the keyboard. The settings are On or Off. The default
settings are On.

Floppy Drive Swap

Set this option to Enabled to permit drives A: and B: to be swapped. The settings are Enabled or
Disabled. The default settings are Disabled.

Floppy Drive Seek

Set this option to Enabled to specify that floppy drive A: will perform a Seek operation at system
boot. The settings are Disabled or Enabled. The optimal and fail-safe default settings are Disabled.

Mouse Support

When this option is set to Enabled, AMIBIOS supports a PS/2-type mouse. The settings are En-
abled or Disabled. The default settings are Enabled.

System Keyboard

This option specifies that a keyboard is attached to the computer. The settings are Present or Ab-
sent. The Optimal and Fail-Safe default settings are Present.

«
...
24
25
26
27
28
...
»

Содержание 586MBH Series

















































Отзывы:

Нет отзывов