ICS 586MBH Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 48

ICS 586MBH Series Скачать руководство пользователя страница 27

Chapter 2: WinBIOS Setup

Manual Number: 41209-004-1

Page 2-5

Primary Display

This option specifies the type of display monitor and adapter in the computer. The settings are
Absent, JGA/EGA, CGA40x25, CGA80x25, or Mono. The Optimal and Fail-Safe default settings
are VGA/EGA.

Password Check

This option enables password checking every time the computer is powered on or every time
WINBIOS Setup is executed. If Always is chosen, a user password prompt appears every time the
computer is turned on. If Setup is chosen, the password prompt appears if WINBIOS is executed.

The Optimal and Power-On defaults are Setup.

OS/2 Compatible Mode

Set this option to Enabled to permit AMIBIOS to run with IBM OS/2. The settings are Enabled or
Disabled. The default settings are Disabled.

Wait For "F1" if Error

AMIBIOS POST error messages are followed by:

Press <F1> to continue

If this option is set to Disabled, AMIBIOS does not wait for you to press the <F1> key after an
error message. The settings are Disabled or Enabled. The Optimal and Fail-Safe default settings
are Enabled.

Hit "Del" Message Display

Set this option to Disabled to prevent

Internal Cache

This option specifies the caching algorithm used for L1 internal cache memory. The settings are:
Disabled or Write/Back (default).

External Cache

This option specifies the caching algorithm used for L2 secondary (external) cache memory. The
settings are: Disabled, Write/Through, Write/Back (default).

System BIOS Shadow Cacheable

When this option is set to Enabled, the contents of the F0000h system memory segment can be read
from or written to L2 secondary cache memory. The contents of the F0000h memory segment are
always copied from the BIOS ROM to system RAM for faster execution. The settings are Enabled
or Disabled. The Optimal default setting is Enabled. The Fail-Safe default is Disabled.

«
...
25
26
27
28
29
...
»

Содержание 586MBH Series

















































Отзывы:

Нет отзывов