ICP POS 566, Руководство пользователя, Страница: 43 / 54

41
LCD Type > to set LCD type. There are 15 types available. The
followings are the available list of LCD panels:
#1 1024 x 768 STN
#2 1280 x 1024 TFT
#3 640 x 480 STN
#4 800 x 600 STN
#5 640 x 480 TFT
#6 640 x 480 18bit <
(choose this one for ICP’s LCD)
#7 1024 x 768 TFT
#8 800 x 600 TFT
#9 800 x 600 TFT
#10 800 x 600 TFT
#11 800 x 600 STN
#12 800 x 600 STN
#13 1024 x 768 TFT
#14 1280 x 1024 STN
#15 1024 x 600 STN
Onboard IDE >
to define which on-board IDE controller channel(s)
to be used. Available options are: Primary, Secondary, Both and
Disabled.
4.8 Auto-Detect Hard Disk
This option detects the parameters of an IDE hard disk drive (HDD
sector, cylinder, head, etc) automatically and will put the
parameters into the Standard CMOS Setup screen. Up to 4 IDE
drives can be detected and the parameters will be listed in the box.
Press <Y> if you accept these parameters. Press <N> to skip the
next IDE drives.
Note: If your IDE HDD was formatted in previous older system, incorrect
parameters may be detected. In this case, you need to enter the correct
parameters manually or low-level format the disk.