ICP POS 566, Руководство пользователя, Страница: 39 / 54

37
Hard Disk Power Down Mode > to specify the power state of the
hard disk after the specified period of hard drive-idle has ended.
Standby Time Out >
to specify the length of the system-idle
period while the system is in full power on state. After this period
of time has ended, the system will go into Standby state.
Suspend Time Out >
to specify the length of the system-idle
period while the system is in Standby state. After this period of
time has ended, the system will go into Suspend state.
Monitor Parallel/Serial Port, Floppy,…Sec_HDD >
to specify
whether or not BIOS has to monitor the specified devices for
power saving purpose.
Power Button Function >
to specify the use of the power button
that is mounted externally on the computer.
MODEM Use IRQ >
to assign an IRQ for modem.
RTC Alarm Resume >
If enabled, the system will wake up from
suspend mode according to the set time.
RTM Alarm Date, Hour, Minute, Second > set the date, hour,
minute and second for RTC Alarm Resume .
4.6 PCI / PLUG AND PLAY Setup
The setup help user handles the POS-566/566L board‘s PCI
function. All PCI bus slots on the system use INTA#, thus all
installed PCI slots must be set.