ICP POS 566, Руководство пользователя, Страница: 40 / 54

38
Plug and Play Aware O/S > Yes or No
When PNP OS is installed, interrupts will be reassigned by the OS
when the setting is Yes. When a non-PNP OS is installed or to
prevent reassigning of interrupt settings, select setting to No.
Clear NVRAM on Every Boot >
if
yes
, BIOS will auto-clear
NVRAM on every boot.
PCI Latency Timer (PCI Clocks) >
to define the latency timing
(PCI clock) for all PCI devices on the PCI bus.
PCI VGA Palette Snoop >
this option is useful only for system
with more than one VGA devices connected to it through different
bus (one PCI and one ISA). To enable those various VGA devices
to handle signal from the CPU on each set of palette registers of
every video devices, it must be set
Enabled .
Offboard PCI IDE Card > to specify if an offboard PCI IDE card
is installed in your computer or not. You must specify the slot
number on the board which will be used for the card.
Offboard PCI IDE Primary (/Secondary) IRQ > to specify the
PCI interrupt that is assigned to the Primary (/Secondary) IDE
channel on the offboard PCI IDE controller.
Assign IRQ to PCI VGA >
to assign IRQ to PCI VGA
PCI Slot (1,2,3,4) IRQ Priority >
to specify the IRQ priority to be
used by the PCI devices on slot 1 to 4.
DMA Channel (0,1,3,5,6,7) >
to indicate whether or not the DMA
channel is assigned for a PnP or ISA card.
IRQ (3,4,5,7,9,10,11,14,15) >
to assign the displayed IRQ to be
used by a legacy ISA adapter card. The settings are ISA/EISA or
PCI/PnP.