Touch Panel Monitor User Manual
,
version 1.0.6,
Last Revised: Dec 2013
Page: 39
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.1.2.1. Installation for WinPAC-8000 and WinPAC-5000
The following procedure describes how to install the PenMount serial touch driver.
Note that
the default COM port for serial touch driver is COM4
.
There is a
RS-232 cable in the shipping package
(Sec.1). The user can directly use
this cable to
connect the monitor with COM4 of WinPAC-8000 to use serial touch
driver to do a touch operation by serial way
. If the user wants to use other com
port, please note the position of TX and RX of COM port. About the pin assignment,
please refer to the user manual of the WinPAC-8000
1.
Copy the driver from the CD-ROM to the WinPAC.
The “PenMount_Serial_TOUCH_Vyyyymmdd(PM6000R).CAB” driver file
can be obtained from:
COM4
Warning:
The WinPAC-5000 series
doesn’t include a COM4, so
please refer to “Changing the
COM Port” in Sec.2.1.2.2 for
details of how to change the
COM Port to the specified COM
Port
.
