Touch Panel Monitor User Manual
,
version 1.0.6,
Last Revised: Dec 2013
Page: 42
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
Changing the COM Port
1.
From the “Start” menu, click “Programs”
”Serial_TOUCH”
”PenMount”
”SetCOM”.
2.
In the pop-up dialog, select the COM Port you wish to use as default and
click the “Set” button to save the changes.
3.
From the “Start” menu, click ”Programs”
Open the “WinPAC Utility”, and
then click the “Save and Reboot” option from the “File” menu.
4.
Disconnect the cable from the current COM Port and reconnect it to the
specified COM Port.
Simulating the Right Mouse Button
For details of how to configure right mouse button simulation, please refer to the
process describes in “Simulating the Right Mouse Button” in
Sec.2.1.1.2
