Touch Panel Monitor User Manual
,
version 1.0.6,
Last Revised: Dec 2013
Page: 64
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.3.1.1. Installation for XP-8000
The following procedure describes how to install the PenMount universal touch driver.
There is a
RS-232 cable in the shipping package
(Sec.1). The user can directly use
this cable to
connect the monitor with COM5 of XP-8000 to use universal touch
driver to do a touch operation by serial way
. If the user wants to use other com
port, please note the position of TX and RX of COM port. About the pin assignment,
please refer to the user manual of the XP-8000.
1.
Copy the driver from the CD-ROM to the XP-8000.
The “PenMount Windows Universal Driver Vx.x.x.x” folder can be obtained from:
Model
Driver path
TP-2070
CD:\TP-2070\Driver\Win_XP_Embedded\XP-8000 device\
COM5
