Touch Panel Monitor User Manual
,
version 1.0.6,
Last Revised: Dec 2013
Page: 55
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.2.2.1. Installation for XP-8000-CE6
The following procedure describes how to install the PenMount Serial touch driver.
Note that the default COM Port for the touch driver is COM5.
There is a
RS-232 cable in the shipping package
(Sec.1). The user can directly use
this cable to
connect the monitor with COM5 of XP-8000-CE6 to use serial touch
driver to do a touch operation by serial way
. If the user wants to use other com
port, please note the position of TX and RX of COM port. About the pin assignment,
please refer to the user manual of the XP-8000-CE6
1.
Copy the driver from the CD-ROM to the XP-8000-CE6 device.
The “PenMount_Serial_TOUCH_Vxx_yyyymmdd_XPAC_CE6(PM6000R).CAB”
file can be obtained from:
Model
Driver path
TP-2070
CD:\TP-2070\Driver\WinCE\V6.0\XP-8000-CE6 device\
TPM-4100/TP-4100
CD:\TPM-4100_TP-4100\Driver\WinCE\V6.0\XP-8000-CE6 device\
COM5
