ICP DAS USA PMC series Скачать руководство пользователя страница 99

Страница: 99 / 340

ICP DAS PMC/PMD Series User Manual

The settings are as follow:



Nickname

：

For user to define nicknames for each power meter,

this nickname will be displayed on the “Power Meter
Information” and “Rule Setting” pages.



Description: The Description field provides a space for the user

to make a brief description of this power meter.



Address: The address will be the Modbus address of this

Modbus RTU power meter, please make sure the address setting

is the same as the settings of the module, if the setting is not

accurate, the connection for PMC/PMD to the power meter will

be failed.



Scan Rate: Input the time interval for PMC/PMD to periodically

retrieve the power data of this Modbus RTU Power Meter, the

setting range will be 0 ~ 65535 seconds.



Polling Timeout: The time interval for PMC/PMD to send

command to the Modbus RTU Power Meter and wait for the

response, the unit will be ms. The setting range will be 1-10000

ms.



Retry Interval: The time interval to wait for PMC/PMD to

repeatedly send command again when PMC/PMD sends

command to the Modbus RTU Power Meter and get no response.

The unit will be second. the setting range will be 3 ~ 65535

seconds.



Main Power Meter: When the “Set as main power meter” is

selected, this power meter will be set as main power meter and

the power data of this meter will be displayed on the Main
Power Meter area on the “Power Data Overview” page.



CT/Phase Nickname: For user to define nicknames for each CT
(or phase), this nickname will be displayed on the “Power
Meter Information” and “Rule Setting” pages. For three-phase

power meter, the user could give nicknames to the Phase A/B/C.

After all settings are completed, click “OK” button to return to the

Power Meter List.

Содержание PMC series





















































































































































































































































































































































Результаты поиска

Содержание PMC series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA PMC series, Руководство пользователя

Результаты поиска

Содержание PMC series

Отзывы:

Бренды по названию

Популярные бренды