ICP DAS USA PMC series, Руководство пользователя

Страница: 67 / 340

ICP DAS PMC/PMD Series User Manual
54
“Port Setting” section, the user can modify the Web Server Port/ Modbus
TCP Port/ Modbus NetID. After all settings are completed, click “Save”
button to save the changes.
The Network Setting (Mobile Network) section is for user to complete the
setting of 4G/3G Mobile Network of PMC-5231M-4GE(or
4GC)/PMC-5231M -3GWA. The default Dial-up number is “*99#”. User
can change it by the proprietary number provided by the
Telecommunication Service Company. To configure the setting for "APN"
and "Authentication" field, please refer to the document provided on the
PMC Web page. "Mobile Code" is an optional setting. It depends on the
service the Telecommunication Service Company provides. If the user
select the "Automatic Connection When Power On" option, it will enable
the PMC-5231M-4GE(or 4GC)/PMC-5231M-3GWA to complete the
4G/3G Network connection automatically when power on PMC. User can
click the "Connection Testing" button to test the 4G/3G Network
connection status between the PMC-5231M-4GE(or 4GC)/PMC-5231M
-3GWA and the 4G/3G Wireless Network. Please Note: In order to complete
the connection to the 4G/3G Network, please remember to disable the PIN
code setting of the SIM used in PMC-5231M-4GE(or 4GC)/PMC-5231M
-3GWA.
After completing the 4G/3G Mobile Network setting, the connection status
between PMC and 4G/3G Mobile Network can be shown on the System
Setting Page; and the connection status (Connect or Disconnect) can be
changed manually. This section also displays the strength level of the 3G
Signal and the IP address that PMC-5231M-4GE(or 4GC)/PMC-5231M
-3GWA occupies through 4G/3G Network.
Figure6-6 : Signal Strength level and IP address for Mobile Network
PMC-52xx also provides the Dynamic DNS service. The following figure
illustrates the configuration interface: