ICP DAS USA PMC series Скачать руководство пользователя страница 74

Страница: 74 / 340

ICP DAS PMC/PMD Series User Manual

vi.

In the “Location” field, input the “Location” string,

The SNMP Manager List is a list for all SNMP Managers which will

interact with the SNMP Agent of PMC/PMD. Please follow the steps as

below to perform the setting for SNMP Managers. After all settings are
completed, click “Save” button to save the changes.

Figure6-13 :

SNMP Manager List

Set up IP Address or domain name of the SNMP Manager that you

want to add. Please set up the Address appropriately, if the settings

are not the same as the settings of the SNMP Manager, the interaction

between PMC/PMD and the SNMP Manager will be failed.

Figure6-14 :

The Address Setting for SNMP Manager

ii.

Click to Enable (or Disable) the working model between the SNMP

Manager and the SNMP Agent of PMC/PMD. Currently PMC/PMD

provides two working models as Read/Write (Polling) and Trap for

SNMP Manager.

Figure6-15 :

The Working Model Setting for SNMP Manager

Содержание PMC series





















































































































































































































































































































































Результаты поиска

Содержание PMC series

Отзывы:

Бренды по названию

Популярные бренды

ICP DAS USA PMC series, Руководство пользователя

Результаты поиска

Содержание PMC series

Отзывы:

Бренды по названию

Популярные бренды