![background image](http://html1.mh-extra.com/html/icp-das-usa/piso-can-fd-series/piso-can-fd-series_user-manual_4476347030.webp)
PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Page: 30
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
dominant level (data or identifier bit logical value ‘0’), but the
monitored bus value was recessive.
17
NBIT1ERR:: During the transmission of a message (with the exception of the
arbitration field), the device wanted to send a recessive level
(bit of logical value ‘1’), but the monitored bus value was
dominant.
18
NACKERR::
Transmitted message was not acknowledged
19
NFORMERR: A fixed format part of a received frame has the wrong format
20
NSTUFERR: More than 5 equal bits in a sequence have occurred in a part of
a received message where this is not allowed
21
NCRCERR:
The CRC check sum of a received message was incorrect. The
CRC of an incoming message does not match with the CRC
calculated from the received data.
22
-
Reserved, read as ‘0’
23
TXBOERR:
Device went to bus-off (and auto-recovered).
24
DBIT0ERR:
Same as for nominal bit rate (see above).
25
DBIT1ERR:
Same as for nominal bit rate (see above ).
26
-
Reserved, read as ‘0’
27
DFORMERR: Same as for nominal bit rate (see above).
28
DSTUFERR: Same as for nominal bit rate (see above).
29
DCRCERR:
Same as for nominal bit rate (see above).
30
ESI:
ESI flag of a received CAN FD message was set.
31
DLCMM:
transmission or reception DLC mismatch bit