![background image](http://html1.mh-extra.com/html/icp-das-usa/piso-can-fd-series/piso-can-fd-series_user-manual_4476347084.webp)
PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Page: 84
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
CAN mask filter setting large
than 0x7FF
0x025
ERR_FLT_EXT_ACM_TOOLARGE_ERROR
The extended identifier of
CAN mask filter setting large
than 0x1FFFFFFF.
0x030
ERR_INVALID_OPMODE_ERROR
CAN operation mode setting
is not support
0x031
ERR_SOFTBUFF_IS_EMPTY
CAN receive buffer is empty
0x032
ERR_NORM_BITRATE_NOT_SUPP_ERROR
CAN normal bit rate setting is
not support
0x033
ERR_DATA_BITRATE_NOT_SUPP_ERROR
CAN data bit rate setting is
not support
0x034
ERR_DATABR_LESS_THAN_NORMBR_ERROR
CAN data bit rate setting is
less than normal bit rate
setting
0x035
ERR_INVALID_NORMAL_SAMPLEPOINT
CAN normal baudrate sample
point setting is not support
0x036
ERR_INVALID_DATA_SAMPLEPOINT
CAN data baudrate sample
point setting is not support
0x101
ERR_SYS_BOARD_ALREADY_ACTIVE
The board has already been
activated.
0x102
ERR_SYS_PORT_NUMBER_ERROR
The Port value is invalid..
0x103
ERR_SYS_INSTALL_IRQ_ERROR
An error occurred while
installing the system interrupt
0x110
ERR_SYS_CAN_RESET_ERROR
Reset CAN chip error
0x111
ERR_SYS_CAN_OPMODE_ERROR
CAN chip operation mode
error
0x112
ERR_SYS_REQ_CONFIG_MODE_TIMEOUT
Change CAN chip to
configuration mode timeout
0x113
ERR_SYS_CHANGE_MODE_TIMEOUT
Change CAN chip operation
mode timeout
0x114
ERR_SYS_SPI_FULLSPEED_RAMTEST_ERROR
Test CAN chip RAM data
error
0x115
ERR_SYS_CAN_FilterIdx_OutOfRange
CAN filter index setting is out
of range.
0x120
ERR_SYS_CAN_TRANSMIT_ERR_DETECTED
Detect an error when