Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
∗
E-mail: [email protected] - 21 -
3. Getting Started
The MDCL-700 comes with a default IP address of 192.168.255.1; therefore, a valid IP address should
be assigned for the module to join your network. Then you can configure the MDCL module from its
web user interface.
The factory default settings
IP Address
Subnet Mask
Gateway
192.168.255.1
255.255.0.0
192.168.0.1
STEP 1:
Connect the MDCL module to the same network as your computer and power on all the
devices. You can also connect the module to PC directly with an Ethernet cable.
STEP 2:
Set the IP configuration on your computer.
If the MDCL module is new with using the default IP address of 192.168.255.1, your pc should pick
up an IP address in the range of 192.168.255.2 to 192.168.255.253 that is not in use.
NOTE:
Details on how to change the IP address on your computer depend upon the type
architecture and operating system you are using. Use the Help and Support functionality on your
computer and search for "IP Addressing".
Power supply (+10 ~ +48V
DC
)