ICP DAS USA I-7532M-FD, Руководство пользователя

Страница: 21 / 48

I-7532M-FD ( 2-port CAN/CAN FD Bridge ) User Manual (version 1.0.0) Page: 21
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
3.3.1. Get Device Configuration
Press the “Refresh” button to scan and list all the necessary I-7532M-FD modules
on “Module Name” location.
Then select the necessary I-7532M-FD module and press “Get Device Config.”
button to start to connect and get device configuration.
[Get Device Config.]
This button is used to get all configuration from module. After get the module’s
configuration, all the module’s parameters will be listed in “CAN”, “Filter”, “Mapping
Rule”, “Merging Rule” and “Splitting Rule” fields.
[Config. Device]
This button is used to set all the settings, listed in “CAN”, “Filter”, “Mapping Rule”,
“Merging Rule” and “Splitting Rule” fields, to module.
[Load Config. From File]
This button is used to get all configuration from a selected file. After load the module’s
configuration from a file, all the module’s parameters will be listed in “CAN”, “Filter”,
“Mapping Rule”, “Merging Rule” and “Splitting Rule” fields.
[Save Config. To File]
This button is used to save all the parameter settings, listed in “CAN”, “Filter”, “Mapping
Rule”, “Merging Rule” and “Splitting Rule” fields, to a selected file.