I-7532M-FD ( 2-port CAN/CAN FD Bridge ) User Manual (version 1.0.0)
Page: 20
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
[Mapping Rule]
This field is used to configure mapping rules of the device. Mapping rule is used to
modify the received CAN/CAN FD frame format (including type, format, ID, data length,
bit rate switch and data ) from one port and then transfer it to another port. It is useful for
user to change the received CAN/CAN FD format to another one. Each device
maximum supports 32 mapping rules.
[Merging Rule]
This field is used to configure merging rules of the device. Merging rule is used to
combine multiple CAN frames (Max. 8) to one CAN FD frame. It is useful for user to
combine multiple CAN frames datas into one CAN FD frame. Each device maximum
supports 32 merging rules.
[Splitting Rule]
This field is used to configure splitting rules of the device. Splitting rule is used to split
one CAN FD frame to multiple CAN frames (Max. 8). It is useful for user to split datas in
one CAN FD frame to multiple CAN frames. Each device maximum supports 32 splitting
rules.
[Status]
This field is used to check the CAN status of the device. This field is useful for user to
check and analysis the device CAN network status (including no error, CAN bus off,
error passive, error warning status and transmit/receive error counter information) .
