I-7532M-FD ( 2-port CAN/CAN FD Bridge ) User Manual (version 1.0.0)
Page: 19
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
3.3. Start to use I-7532-FD Utility tool
Figure 3-3-1 Main frame of the I-7532M-FD Utility tool
[Basic]
This field is used to connect to the module and get device information, get device
configuration, configure device, load device configuration from file and save device
configuration to file.
[CAN]
This field is used to configure the CAN controller mode, CAN FD specification,
arbitration/data-phase baudrate and advanced forwarding rule.
[Filter]
This field is used to configure CAN ID filter function. Users can reject remote
standard/extended CAN ID and set acceptance standard/extended CAN ID.