ICP DAS USA I-7088 Скачать руководство пользователя страница 55

Страница: 55 / 159

I-7088 and M-7088 User Manual, Rev: A1.2 7MH-026-A12

2.17. $AA9(Data)

Description:

This command is used to send data to the LED display.

Syntax:

$AA8[CHKSUM](CR)

Delimiter character

The address of the module where the data is to be sent
(00 to FF)
The command to send data to the LED display

(Data)

5 decimal 1 decimal point
(Max. = 99999. , Min. = 0.0000 )

Response:

Valid Command:

!AA[CHKSUM](CR)

InValid Command:

?AA[CHKSUM](CR)

Delimiter character for a valid command

Delimiter character for an invalid command
(An invalid command is returned if the specified
channel is incorrect.)

The address of the responding module (00 to FF)

There will be no response if the command syntax is incorrect, there
is a communication error, or there is no module with the specified
address.

Содержание I-7088
































































































































































Результаты поиска

Содержание I-7088

Отзывы:

ICP DAS USA I-7088, Руководство пользователя, Страница: 55 / 159

Результаты поиска

Содержание I-7088

Отзывы: