16
3
Commands Descriptions
3.1 Initialize Mode Commands
The commands in this section (except ‘enable’ command) can be executed under all
command modes. These commands are global commands.
3.1.1 exit
Description
Exit current mode and quit CLI.
Syntax
exit
Parameter
None
3.1.2 configure terminal
Description
Enter configuration mode.
Syntax
configure terminal
Parameter
None
3.1.3 enable
Description
Enter enable mode.
Syntax
enable
Parameter
None
3.1.4 Show terminal
Description
Show CLI environment variables
Syntax
show terminal
Parameter
None
3.1.5 Show history
Description
Show command history (Note: commands issued in one execution
mode only appear in history of that execution mode)
Syntax
show history
Parameter
None
3.1.6 Show clock
Description
Show current time
Syntax
show clock [detail]
Parameter
None
3.1.7 Show clock detail
Description
Show detailed information
Syntax
show clock detail
Parameter
None
