Commands Descriptions
27
half
Forced half duplex.
full
Forced full duplex.
auto
Auto negotiation of duplex mode.
[ half | full ]
Advertise half /full duplex.
3.3.19 editing
Description
Enable command line editing
Syntax
editing
Parameter
3.3.20 flowcontrol
Description
Enable/Disable flow control.
Syntax
flowcontrol { on | off }
Parameter
Name
Description
on
Enable flow control.
off
Disable flow control.
3.3.21 frame-sizes
Description
Select the frame sizes that the enabled tests will loop through
Syntax
frame-sizes { [ 64 ] [ 128 ] [ 256 ] [ 512 ] [ 1024 ] [ 1280 ] [ 1518 ] [ 2000 ]
[ 9600 ] }
Parameter
Name
Description
64
Enable testing with 64-byte TST PDUs
128
Enable testing with 128-byte TST PDUs
256
Enable testing with 256-byte TST PDUs
512
Enable testing with 512-byte TST PDUs
1024
Enable testing with 1024-byte TST PDUs
1280
Enable testing with 1280-byte TST PDUs
1518
Enable testing with 1518-byte TST PDUs
2000
Enable testing with 2000-byte TST PDUs
9600
Enable testing with 9600-byte TST PDUs
3.3.22 green-etherneteee
Description
Powering down of PHYs when there is no traffic.
Syntax
green-etherneteee
Parameter
3.3.23 green-etherneteee optimize-for-power
Description
Set if EEE shall be optimized for least power consumption (else
optimized for least traffic latency).
Syntax
green-etherneteee optimize-for-power
Parameter
3.3.24 green-etherneteee urgent-queues
Description
Enables EEE urgent queue. An urgent queue means that latency is kept
to a minimum for traffic goin to that queue. Note: EEE power savings will
be reduced.
Syntax
green-etherneteee urgent-queues [ <range_list> ]
Parameter
Name
Description
range_list
EEE Interface.
