Operator Interface
13
2.6 Terminal Key Function
Following is the list of all the terminal keys and their function.
Table 2-2 List of Terminal Keys
ENTER
CTRL-M
Run a CLI config script
TAB
CTRL-I
Tab completion.
If tab is pressed after a non-whitespace character, complete the word
before the Tab.
If tab is pressed after a whitespace character, complete the next word.
?
Display available commands
If ? is pressed after a non-whitespace character, show possible
choices for this word.
If ? is pressed after a whitespace character, show possible choices for
the next word.
<Up Arrow>
CTRL-P
Up history
<Down Arrow>
CTRL-N
Down history
Home
CTRL-A
Move the cursor to the beginning of the input line
End
CTRL-E
Move the cursor to the end of the input line
<Left Arrow>
CTRL-B
Move the cursor backward
<Right Arrow>
CTRL-F
Move the cursor forward
BACKSPACE
CTRL-H
Erase the character before the cursor
2.7 Notation Conventions
The notation conventions for the parameter syntax of each CLI command are as follows:
Parameters enclosed in [ ] are optional.
Parameter values are separated by a vertical bar “|” only when one of the specified
values can be used.
Parameter values are enclosed in { } when you must use one of the values specified.
