ICP DAS USA CAN-Logger Series, Руководство пользователя, Страница: 5 / 45

CAN-Logger series CAN Bus data logger devices User Manual (version 1.0.1) Page: 5
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.1. Specifications
Model Name CAN-Logger100 CAN-Logger200
CAN Interface
Transceiver NXP TJA1042
Channel Number 1 2
Connector
5-Pin male M12 x 1
(Pin 1: F.G., Pin 2: +Vs, Pin 3: GND,
Pin 4: CAN_H Pin 5: CAN_L)
5-Pin male M12 x 2
(Pin 1: F.G., Pin 2: +Vs, Pin 3: GND,
Pin 4: CAN_H Pin 5: CAN_L)
Transmission Speed
(bps) 10 k, 20 k, 50 k, 100 k, 125 k, 250 k, 500 k, 800 k, 1 M and user-defined baud
rate
Terminator Resistor DIP switch for the 120 Ω terminator resistor
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
CAN Filter Configuration Utility tool
USB Interface
Connector USB Type B x 1
Compatibility USB 2.0 High Speed
Max. Data flow Transmit: 4000 fps ; Receive: 1000 fps
Software Driver Windows 2K/XP/7/8
Data Logger Capability
Storage Media SDHC type flash – support 4 to 32 GB (Class 10 would be recommended)
Recording Format Binary
Time Stamp
Resolution
10 us
Configuration Utility tool
Trigger Log continuously
Data Logger Maximum message rate, receive: 15000 msgs/s
LED
Round LED
Power, MS, SD, CAN1, CAN2,
CAN_ST LEDs Power, MS, SD, CAN_Rx, CAN_Tx,
CAN_ST LEDs
Power
Power supply USB power or CAN Bus power (Unreg10 ~ +30 V
DC
) delivery
Protection Power reverse polarity protection, Over-voltage brown-out protection