manualshive.com logo in svg

ICP DAS USA CAN-Logger Series, Руководство пользователя, Страница: 24 / 45

Поделиться
Скачать
ICP DAS USA CAN-Logger Series Скачать руководство пользователя страница 24

  Then 

the 

“Device 

Configuration” window will be popped up. 

 

 
Step2:  On the “Device Configuration” windows, user can set the CAN Bus parameter, 

and other prarameters. The detail functions of these parameters are list below. 

 

[CAN Bus Parameters] 
“Port Enable” :   

Enable/Disable the CAN1/CAN2 port. 

 
“Silent Mode” :   

Set the CAN port into silent mode. When setting the CAN port into 
silent mode, the CAN port will just receive CAN messages, no CAN 
Ack command be sent to the CAN Bus. 

 
“Baud Rate”: 

CAN Bus baud rate in used. Via setting the ratary switch from ‘0’ ~ 
‘8’, user can change the CAN Bus baud rate from ‘10kbps’ to 
‘1Mbps’. If you want to use user-defined CAN baud rate, user can 
set the ratary switch to ‘9’, and then set the “Defined Baud Rate” 
parameter to the CAN baud rate that you need. 

CAN-Logger series CAN Bus data logger devices User Manual (version 1.0.1)   

 

 

Page: 24

 

 

Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]

 

 

Содержание CAN-Logger Series














































Отзывы:

Нет отзывов