CAN-Logger series CAN Bus data logger devices User Manual (version 1.0.1)
Page: 30
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
“No”:
number of the data listed in the frame.
“Type”:
Type of data the CAN-Logger device received. This field will be
“TRANSMIT”, “RECEIVE” and “EVENT”.
“TRANSMIT”: CAN Messages that send to the CAN Bus via CAN-Logger
device.
“RECEIVE”:
CAN messages that CAN-Logger device received.
“EVENT”:
CAN error event that CAN-Logger device detected.
The ”Fid”, “Ftype” and “Fformat” fields of “EVNET” message
will be in the format of “0x0EEEEEEE”, “ERROR” and
“Other”. And the data of “Fdata” field combines two
parameters, CAN status and CAN error counter, which each
parameter is 4-bytes in little-endian format. About the
content of CAN status and CAN error counter, please refer
to section 7.1 and 7.2 for detail information.
“Fid”:
CAN ID of message frame.
“Ftype”:
Type of the CAN meesage frame. This field will be “ERROR”, “DATA” and
“RTR”.
“ERROR”: It means that this message is an “EVENT” message.
“DATA”:
It means that this message is a CAN data message.
“RTR”:
It means that this message is a CAN remote transmission
request message.
“Fformat”:
Format of the CAN meesage frame. This field will be “Other”, “2.0A” and
“2.0B”.
“Other”:
It means that this message is an “EVENT” message.
“2.0A”:
It means that this message is a CAN 11-bit ID message.
“2.0B”:
It means that this message is a CAN 29-bit ID message.
“Fdlc”:
Data length of the “Fdata” field.
“Fdata”:
Data of the CAN message. The content of this dield is dependent on the
“Type” of the message. For “TRANSMIT” and “RECEIVE” message, this
filed is used for the data of CAN message. For “EVENT” message, this
field is used for CAN status and CAN error counter parameters.
“Datetime”:
Date time of the CAN-Logger device to transmit/receive/detect the
message.
“Timestamp”:
Timestamp of the CAN-Logger device to transmit/receive/detect the
message. The unit of this field is micro-second.