Step 2:
[ Send CAN messages by using “Basic Mode” ]
“Transmission mode”:
Mode for transmitting a CAN message. Now the Utility tool
only supports “Normal” method to send CAN messages.
“Frame mode”:
Transmitted CAN meesage mode, included “2.0A” and “2.0B”
items.
“2.0A” means using a CAN 11-bit ID format message.
“2.0B” means using a CAN 29-bit ID format message.
“Frame type”:
Transmitted CAN meesage type, included “DATA” and “RTR”
items.
“DATA” means using a CAN data frame message.
“RTR” means using a CAN remote frame message.
“ID increase progressively”:
When enable this item, the transmitted “Frame ID” items
will increase after sending a CAN message.
“data increase progressively”:
When enable this item, the transmitted “Frame data”
item will increase after sending a CAN message.
“Frame ID”:
Transmitted CAN ID field.
“Frame data length”:
Transmitted CAN data lengh field.
“Frame data”:
Transmitted CAN data field.
“Transmission number”:
Number of CAN messages need to be sent when press
“Transmit” button.
“Period”:
Period of sending a CAN message.
CAN-Logger series CAN Bus data logger devices User Manual (version 1.0.1)
Page: 27
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
