CAN-8x23 user’s manual (Revision 3.20, Ma r/08/2012) ------
51
4.2 CAN-8423/CAN-8823 Configuration Flowchart
Select one or more of I-8000/I-87K
AI/AO/DI/
DO modules for the user’s
application
Plug these I-8000/I-87K modules
into the available C A N -842 3 I/O
expansion slots
Apply this EDS file with the
CANopen master interface and run
the CAN-8423 on the CAN network
Select the necessary
ICPDAS I-8000/I-87K
IO modules for users
CANopen application.
Use the CAN Slave Utility to
configure the AI/AO channels of the
I-8000/I-87K modules and produce
an EDS file for the present state
1. Turn off the CAN-8423.
2. Connect the COM1 of the CAN-8423 with
the PC’s COM port via the RS-232 cable,
CA0910F.
3.
Turn the “BAUD” rotary switch to ‘9’.
4. Turn on the CAN-8423.
5. Execute the CAN Slave Utility to configure
the AI/AO channels of the I-8000/I-87K
modules and establish the EDS file.
After finishing the parameter
configuration
and
EDS
file
production, turn off the C A N -
8423, set the proper node ID and
baud rate by using the rotary
switches, and turn on the C A N -
8423.