Page
6
USER MANUAL FOR iCOOL RECOVERY SYSTEMS
MODEL C COMPACT MODELS 2009-2010 Updated Oct 2010.
Updates are published regularly on our website www.icoolsport.com
STEP 4
YOUR SYSTEM SOFWARE WiLL BEGiN LOADiNG
Your iCool has a full colour high-resolution touchscreen that
eliminates all switches and provides complete control over your
iCool system in a user-friendly and intuitive manner. it also
provides a substantial amount of additional information to assist
you.
When you turn on the power for the first time the system will load
the latest software from its memory card and run a diagnostic self
test routine. This will take about 20 seconds. During this time you
will see this screen (shown at right) and then a BLACK screen.
ThE SOFTWARE LOADiNG SCREEN
ThE STATUS BAR LiGhT
TOUCh ThE LOGO SCREEN ANYWhERE TO CONTiNUE
ThE STATUS BAR WiLL FLASh WhiTE
The STATUS BAR on top of the iCool changes colour or flashes to give a
clear indication of each function.
While the software is loading the status bar will flash white while the screen
shown above and then a black screen appears for about 15 seconds while
the computers test the safety systems.
Touching your personal logo screen (see below) will stop the bar flashing
and show a steady white light to indicate that the systems check was suc-
cessful and that your iCool is ready to use.
Then the iCool owners logo screen will appear such as the screens below.
The Status bar glows BLUE when only the pump is running,
GREEN
when the cooling system is running and
RED
when the heating system is running
if the bar glows RED when you start cooling please refer to page 15 for an explanation.
YOUR PERSONAL LOGO WELCOME SCREEN LiKE ThESE SAMPLES BELOW WiLL APPEAR AT ThiS TiME
