Page
11
USER MANUAL FOR iCOOL RECOVERY SYSTEMS
MODEL C COMPACT MODELS 2009-2010 Updated Oct 2010.
Updates are published regularly on our website www.icoolsport.com
AUTOMATiC SYSTEM ShUTDOWN TiMER
You can preset your iCool to shut down at any time up to five hours in the future. This is very
convenient for coaches and specialists who may want to leave the training area early but want
to make sure that the system is not left running needlessly. To set this time, touch the
SET
ShUT DOWN BUTTON
and the clock digits on the bottom right of the screen will begin to flash
as with setting the clock. Use the same up down and left right arrows
to set the number of hours and minutes you wish to elapse before the
system automatically shuts down. The system automatically begins the
countdown and will stop when the time you set reaches zero. The time
remaining before shutdown is displayed on the main clock display screen.
As the same arrows are used to set all three time functions, to avoid confusion, a red
dot appears next to be button of the function being set.
A very popular and useful feature of your iCool is the
SESSiON COUNTDOWN TiMER
.
This allows you to accurately control the immersion times of athletes and to repeat those times as often as need-
ed. This is an essential part of successful cryo recovery therapy and is just as important as maintaining accurate
and consistent temperatures, which of course your iCool does perfectly.
The session timer is set up from the main TiME SETTiNG SCREEN by touching the
SET COUNTDOWN
button.
The numbers on the setting screen in the bottom right-hand corner will begin to flash and you can use the left,
right and up, down arrows to change the time in minutes and seconds. Once you have set the time you want your
athletes to remain in the bath, touching the
DiSPLAY COUNTDOWN FULL-SCREEN
button will take you to the
screen illustrated below. This screen allows you to see the countdown from a distance and also to control it in
various convenient ways. The current pool temperature and the outside temperature will also be displayed.
The count down can be set for once only, or it can repeat automatically as many times
as you like. This is particularly convenient if you have a number of athletes using
the same pool at the same time. The system beeps for each of the last five seconds
at
the end of each countdown to warn the athletes to get ready to get either in or out of
the pool and pauses for several seconds to allow the changeover before the count-
down begins again (if it is set in the repeat mode).
2:10
27
14
This button starts the
countdown
When this button is pressed
the countdown will repeat
until the repeat function is
cancelled by pressing once
again. A red dot indicates that
it is active
Resets time to the preset
value in the single shot mode,
ready to start again by press-
ing the START button
You can pause the count-
down at any time and start
again from the same position
with this button, or touch
reset to start from the top.
