Page
15
USER MANUAL FOR iCOOL RECOVERY SYSTEMS
MODEL C COMPACT MODELS 2009-2010 Updated Oct 2010.
Updates are published regularly on our website www.icoolsport.com
Please note.
iCool Systems are sold all around the world and these specifications may be different for
units delivered in your country due to local conditions or regulations. We are constantly
improving our products and therefore certain specifications may change due to ongoing
research and development.
We welcome your feedback and suggestions and we offer support for general enquiries and
information for specific countries on our website at..
Thank you for choosing iCool the world’s most popular ice bath therapy and recovery
systems.
SPECiFiCATiONS
COMPACT
Cool
COMPACT
Dual Temp
COMPACT
Twin
COOLiNG POWER
3200 Watts
3200 Watts
5000 Watts
hEATiNG POWER
-
2400 Watts
-
RUN (& Max.) POWER @220Volts 5 Amps(12Amps) 5 Amps(12Amps) 7 Amps(14Amps)
RUN (& Max.) POWER @110Volts 10 Amps(22Amp) 10 Amps(22Amp) 14 Amps(26Amps)
hEAT PUMP TYPE
Rotary
Rotary
Rotary
EARTh LEAK SAFETY DEViCE
Yes 30 Milliamps Yes 30 Milliamps
Yes 30 Milliamps
STAiNLESS STEEL hEAT
EXChANGER TANK
12 plate, silver
soldered
12 plate, silver
soldered
12 plate, silver
soldered
ROLLER BEARiNG WhEELS
Yes
Yes
Yes
STAiNLESS hANDLES
Yes
Yes
Yes
AREA LiGhTiNG
Yes 10 Watts
Yes 10 Watts
Yes 20 Watts
hi RESOLUTiON COLOUR
TOUCh SCREEN
Yes 800 x 480
Yes 800 x 480
Yes 800 x 480
ELECTRiCALLY iSOLATED
PUMP, S. STEEL ShiELDED
Yes 25 Litres per
minute pre set
Yes 25 Litres per
minute pre set
Yes 40 Litres per
minute pre set
MAXiMUM PUMP CAPACiTY
55 Litres Per Min 55 Litres Per Min
85 Litres Per Min
LOCKiNG POWER PLUG
3 Pin heavy Duty 3 Pin heavy Duty
3 Pin heavy Duty
WEiGhT KG / POUNDS
37KG 81 Lbs
38KG 84 Lbs
40KG 88 Lbs
DiMENSiONS h. - W. - D. in mm.
545x475x290
545x475x290
545x475x290
DiMENSiONS h. - W. - D. inches
21.5x18.7x11.4
21.5x18.7x11.4
21.5x18.7x11.4
www.iCoolSport.com
iF ThE STATUS BAR LiGhT ON TOP OF ThE iCOOL TURNS RED WhEN YOU START ThE COOLiNG CYCLE.
if the water temperature in the pool is already lower than the cooling temperature you set then the iCool will
automatically attemp to heat the water to match the temperature you have set. The red bar indicates activaion of
the heating mode. if your model does not have a heating system built in nothing will happen.
For safety reasons the system will not change from heating mode back to cooling mode unless you re start it by
turning the main power off and back on. For cooling, you must set a temperature that is lower than the present
temperature of the water. if you need to set a temperature that is very close to or the same as the present pool
temperature start the cooling within a few seconds after starting the pump, before the system has time to read
the water temperature.
