Attach the heavy joining plate to the rear of the cabinet using the
PDFKLQHVFUHZVSURYLGHGZLWKWKHKDUGZDUH6HHEHORZ7LJKWHQ
the screws loosely to allow a little movement while joining the two
modules.
3OXJRQHHQGRIWKHÀDWZLUHVLJQDOFDEOHLQWRWKHVRFNHW
provided. It only goes into the socket one way and the cable is
reversible. It does not matter which end goes into which module.
Using a #1 Phillips screw driver, secure the connector with two
3KLOOLSVKHDGVFUHZVVXSSOLHG0DNHVXUHWKHFRQQHFWRULV
fully seated.
5
Users Manual
ICL-FR
I
f you purchased two ICL-FR arrays separately and now want to
turn them into a ICL-FR-DUAL array, you will also need an ICL-F-
KIT-UP joining kit..
7KH¿UVWDVVHPEO\VWHSLVWRUHPRYHWKHWRSRIERWKPRGXOHV7R
remove the top, remove the eight machine screws from each side
of the cabinet and lift the end piece and its mounting brackets out
of the cabinet as shown.
The next step is to install the two heavy joining plates They will be
packed with the hardware if you ordered an ICL-FR-DUAL.
Note: The graphics that follow show the two joining plates
mounted in one cabinet. In actual practice, it is better to mount
one plate in one cabinet and the other in the second cabinet. They
should be attached to the side where the small db15 signal cable
connector is located. This reduces the possibility of damaging the
connector while sliding the two cabinets together.
Use the mounting bracket machine screws you removed to install
the two heavy joining plates .Tighten the screws lightly. The
joining plates need to be a little loose to slide easily into the other
cabinet.
Содержание Iconyx IC Live ICL-FR
Страница 75: ......
Страница 76: ... RRN 6WUHHW RRWKLOO 5DQFK 86 3KRQH D VDOHV UHQNXV KHLQ FRP ZZZ UHQNXV KHLQ FRP 5 5HY 6HSWHPEHU ...