Users Manual
ICL-FR
19
CONNECT
7KHYHUWLFDOSDQHLQHDFK3URSHUWLHVZLQGRZSURYLGHVIRUORXGVSHDNHULGHQWL¿FDWLRQDQGVHOHFWHGFRQWUROIHDWXUHV6HHEHORZIRUGHWDLOV
Status Indicators:
The Thermal, Peak and Fail indicators above the output meter provide critical information on the array’s status. The
3HDNLQGLFDWRUZLOOÀDVK\HOORZRUUHGZKHQHYHUWKHGHYLFH¶VSHDNOLPLWHULVWULJJHUHG,W¶VQRUPDOIRUWKHLQGLFDWRUWRÀDVKRFFDVLRQDOO\LI
the loudspeaker is being used close to its rated output. Flashing frequently is a sign that the system volume needs to be turned down. The
7KHUPDOLQGLFDWRUZLOOVWDUWWRÀDVK\HOORZDVWKHDPSOL¿HUWHPSHUDWXUHDSSURDFKHVDSUHVHWOHYHODQGZLOOWXUQUHGLIWKHWHPSHUDWXUHFRQWLQ
XHVWRLQFUHDVHDVDZDUQLQJWKHDPSOL¿HULVDERXWWREHVKXWGRZQ7KH)DLOLQGLFDWRUJORZVUHGZKHQWKHDPSOL¿HUKDVEHHQVKXWGRZQE\
WKHSURWHFWLYHFLHDWUHODWHGVKXWGRZQVZLOOUHVHWDXWRPDWLFDOO\DIWHUWKHDPSOL¿HUFRROVGRZQWRDVDIHWHPSHUDWXUH
$VDIXUWKHUSURWHFWLYHPHDVXUHWKHDPSOL¿HU¶VJDLQZLOOJUDGXDOO\EHUHGXFHGLQUHVSRQVHWRRYHUKHDWLQJDQGRUWRKLJKDQLQSXWOHYHO
+RZHYHULW¶VEHVWWRPDQXDOO\UHGXFHWKHLQSXWVLJQDOOHYHORYHUDOOV\VWHPYROXPHLQUHVSRQVHWRGLVWUHVVVLJQDOV
Power On/Standby Button:
1RWHWKDWWKH3RZHU2Q6WDQGE\EXWWRQZLOOQRWVKRZZKLOHRSHUDWLQJLQWKHYLUWXDOPRGH,WDSSHDUVRQO\
when associated with an actual array.
Loudspeakers model number or name
Input signal level bar graph; “0” indicates
the onset of input clipping. Analog inputs
clip at +12 dBu without the 10 dB input
pad, +24 dBu with the pad.
Volume control slider; adjust by grabbing
slider with mouse or by using up/down
DUURZV6HWWLQJVDGMXVWDEOHIURP³´WR
in 1 dB steps, then to -100 dB in one step;
settings below -8 dB prevent the loud-
speaker from reaching full output.
Inv. button inverts the input signal polarity;
glows green when signal is inverted. Use
with caution.
$PSOL¿HUWHPSHUDWXUHLQGLFDWRUDQG
bar graph.
6DYHEXWWRQ
5HDGV6DYHZKHQHYHUDFKDQJHLV
made as a reminder of the need to save
changes.
7H[W¿HOGVIRUHQWHULQJDQDPHIRUWKH
loudspeaker and listing its location.
Press Wink with Light button to turn the
loudspeaker’s wink light on and off to aid in
identifying the loudspeaker and its location.
Press Wink with Audio to send a Tone
signal or Pink Noise to the loudspeaker.
2XWSXWVWDWXVLQGLFDWRUVIRUHDFKDPSOL¿HU
6HH6WDWXV,QGLFDWRUVEHORZIRUGHWDLOV
Output bar graph. “0” represents the
maximum uncompressed output level;
positive values indicate how far the signal
is overshooting into limiting; negative
values indicate the amount of headroom
left before the onset of limiting.
Mute button mutes the entire loudspeaker.
3UHVVWRUHVWDUWWKHORXGVSHDNHUV'63LQ
the event of a malfunction.
3RZHU2Q6WDQGE\EXWWRQ7XUQVDPSOL
¿HU2QRUSODFHVLWLQ6WDQGE\7XUQLQJ
AC power to the Array On and Off is a
separate operation.
/RXGVSHDNHUV'63VDPS]RU
N+]6HHSDJHIRUPRUHGHWDLOV
Содержание Iconyx IC Live ICL-FR
Страница 75: ......
Страница 76: ... RRN 6WUHHW RRWKLOO 5DQFK 86 3KRQH D VDOHV UHQNXV KHLQ FRP ZZZ UHQNXV KHLQ FRP 5 5HY 6HSWHPEHU ...