Appendix III: ICONYX-R Hardware Inputs, Outputs & Indicators, Dimensions
7RFRQQHFWDQ,&O)5DUUD\$21QHWZRUN\RX¿UVWPDNHWKHKDUGZDUHFRQQHFWLRQVDQGWKHQLI\RXDUHXVLQJ&REUD1HWIRU
GLJLWDODXGLRGLVWULEXWLRQDVVLJQVLJQDOURXWLQ$21VRIWZDUH6LQFHDOO(WKHUQHWFRQQHFWLRQVDUHPDGHXVLQJ5-FRQQHFWRUV
DQG&DWFDEOHWKHQHWZRUNLQIUDVWUXFWXUHLVFRVWHIIHFWLYHDQGHDV\WRLQVWDOO<RXFDQDOVRFRQQHFW6HULDO'LJLWDO$(6DND$(6(%8
and analog audio to an ICL-FR array, as well as Fault Detect and Fault Relay lines.
53
Primary & Secondary Ethernet Inputs
RJ-45 female;when both are connected, change-
RYHUWR6HFRQGDU\LVDXWRPDWLFLI3ULPDU\IDLOV
<HOORZ/('ÀDVKHVZKHQWKHFRQQHFWRULVDFWLYH
glows steadily when data is streaming. Green LEDs
glow when connected but inactive, turn Orange to
indicate a faulty connection.
Overdrive LED
Flashes red when the Primary Analog Input
SUHDPSOL¿HULVEHLQJRYHUGULYHQ
Signal LED
Flickers when an audio signal of at least -30
dBu is present at the primary analog audio
input.
Master/Slave Setup Switches
Primary Analog Input/Output
;/5IHPDOHSLQFKDVVLVSLQSLQ
Secondary Analog Input/Output
&DQEHFRQ¿JXUHGIRU³SULRULW\RYHUULGH´
Fault Input
Pins + and -; see Fault Input below for details
Fault Relay
Pins NC, W and NO; see Fault Relay below
for details
Remote Control Connections
IRUUHPRWHFRQWUROIURP56GHYLFHVDQG
for preset control using rotary switches.
3LQV; <DUHIRUDEDODQFHG56,QSXW
Pin G is ground. Pins G, LED & W are used
IRUURWDU\VZLWFKFRQQHFWLRQV6HHSDJHIRU
details.
Fault Input
Opto-isolated input used to monitor the pres-
ence of an external wiring loop; absence of a
YROWDJHLVUHSRUWHGWRWKH'63DQGWUDQVPLWWHG
to the monitoring computer over the Ethernet.
Operates on 5 to 24 V DC
Fault Relay
NO / NC relay contacts used to report a failure
to an external monitoring system; used mainly
to trigger a failure indication on a hard-wired
monitoring device; handles up to 0.5 Amps at
24 V AC or DC
Looping AES/EBU Input
and Looping Output
Preset Controls & Readout
Mute Button
Push Button Volume Controls
$OVRIXQFWLRQDVDPDQXDO6WDQGE\2Q
control
Input Pad & LED Indicator
On / Off 10 dB pad for Primary Analog
Input; allows input signals of up to +24
dBu when inserted
AES/EBU Input Switch
When On, turns analog input 1 into an
$(6(%8LQSXW
Power LED
*ORZVZKHQDPSOL¿HUSRZHULV2Q
Thermal LED
Lights to indicate that an over-tempera-
WXUHVHQVRUKDVVKXWGRZQWKHDPSOL¿HU
Push-To-Reset
Circuit Breaker
9$&
IEC Power
Connector
NOTE:
7RSUHYHQWLQDGYHUWHQWRSHUDWLRQWKH0XWH9ROXPH8S 9ROXPH'RZQ,QSXW3DGDQG$(6(%8SXVKEXWWRQVQHHGWREHSUHVVHGDQG
held down for several seconds before they activate.
2. In multi-module arrays, AC power for the array can be brought into any of the input ports;
Signal cables must terminate in the input
port of the designated “Master” module
.
,&/LYH,&/)5DUUD\VLQFOXGH3RZHU2Q6WDQGE\FRQWUROEXWGRQRWKDYHDQ$&0DLQVSRZHUVZLWFK3UHVVLQJWKH9ROXPH8SDQG
9ROXPH'RZQSXVKEXWWRQVVLPXOWDQHRXVO\IRUVHYHUDOVHFRQGVZLOOWRJJOHWKHDUUD\EHWZHHQ³2Q´DQG³6WDQGE\´
Users Manual
ICL-FR
Содержание Iconyx IC Live ICL-FR
Страница 75: ......
Страница 76: ... RRN 6WUHHW RRWKLOO 5DQFK 86 3KRQH D VDOHV UHQNXV KHLQ FRP ZZZ UHQNXV KHLQ FRP 5 5HY 6HSWHPEHU ...