icontrols PULSE, Руководство по установке и инструкции пользователя

Страница: 9 / 30

8
9
FIGURE: 5
WARNING
WARNING: THE OPERATOR ASSEMBLY IS HEAVY AND CAN CAUSE SERIOUS INJURY OR DEATH SHOULD IT BE
DROPPED DURING INSTALLATION. TAKE ALL NECESSARY SAFETY PRECAUTIONS TO AVOID DROPPING THE
OPERATOR (I.E. TETHER/TIE DOWN) PRIOR TO ATTEMPTING INSTALLATION. SCAFFOLDING OR SCISSOR-LIFTS/
PLATFORM-LIFTS ARE ADVISED FOR OPERATOR INSTALLATION. NEVER ATTEMPT TO INSTALL AN OPERATOR
ABOVE EYE-LEVEL OR FROM A LADDER.
Operator Installation
ENSURE THAT PREVIOUS STEPS FOR SHAFT COLLAR/KEY INSTALLATION HAVE BEEN PROPERLY FOLLOWED
BEFORE PROCEEDING. FAILURE TO DO SO COULD RESULT IN DAMAGE TO THE ENCODER DURING
OPERATOR INSTALLATION.
Align the keyway of the gearbox with the pre-mounted
key (see Key Shaft Collar/Key Installation on previous
page) located on the mounting side of the shaft.
Slide the gearbox onto the shaft until it makes contact with
the Key Shaft Collar.
Assemble the Torque Arm Bracket to the Torque arm
using the fastener provided. NOTE: DO NOT TIGHTEN THE
NUT FULLY). Anchor the Torque Arm Bracket to the solid
structural support.
Fasten the torque arm to structural support by means of
the supplied bolt, locking nut and washers. The supplied
bracket may be required. If the torque arm does not align
with structural support, you may try adjusting the torque
arm position on the gearbox (see Assembling Torque Arm
to Gearbox) accordingly or use the Torque Arm Bracket.
Junction Box Mounting
The junction box contains terminals for power
connections, as well as battery/communication
connections for the control panel. Mount the junction box,
by means of the mounting flanges and in accordance
with the electrical code, in a conspicuous location
that will provide access for both electrical power and
control panel wiring connections. The junction box is pre-
wired with 2 feet of flexible conduit, if longer lengths are
required, consult with factory. Do not mount the junction
box near moving parts or in an inaccessible area.
FIGURE: 6
FIGURE: 7
FAILURE TO SECURELY FASTEN TORQUE ARM COULD RESULT IN DAMAGE, SERIOUS INJURIES OR
DEATH AND WILL VOID THE WARRANTY.