ICON ATV08, Руководство пользователя

Страница: 15 / 32

ICON EV Manual Operation and adjustment ATV08 15
Charging steps and method
1. Check carefully whether the rated input
voltage of the charger is consistent with the
voltage of the power grid.
2. The battery can be directly put on the bike
for charging and can also be taken down from
the bike to be charged indoors and at other
appropriate places.
3. Connect first the output plug of the charger
with the charging jack of the battery properly,
and then connect the input plug of the charger
to the AC power supply.
4. At this time, the power indicator light and
the charge indicator light of the charger are
on, indicating that the charging has been
connected.
5. After charging, first pull out the AC power
plug, and then pull out the plug connected
with the battery.
Charging time for a fully discharged battery is 6 to
8 hours. After the charge indicator goes from red
to green, the battery has been fully charged.
A new bike had will need to be re-charged for 8
to 9 hours after discharging since charging for
the first time. The one-week depth charging and
discharging is a cycle to fully activate the active
substances inside the battery. Later, it can be re-
charged even if its power is not used up.
Common sense of charging and use:
• The battery should be charged in a spacious
environment, staying away from high
temperature, high humidity and close fire,
because the battery and the charger are