ICON ATV08, Руководство пользователя

Страница: 21 / 32

ICON EV Manual Operation and adjustment ATV08 21
Chain
Wear the chain and elongate it to a certain extent, it will in the
chain will climb to the chain wheel and jump, and at this time
the chain has not meshed with the chain wheel correctly, thus
affecting the cycling performance; in case of such a situation, the
chain should be timely adjusted.
To determine the length of the chain: adjust the front derailleur
to the lowest shift (the smallest tooth of the chain ring) and also
adjust the Back fender to the lowest shift (the smallest tooth of
the flywheel) to check whether the chain sag is more than 15mm
(as shown). If it is more than 15mm, the chain is too long, please
go to your supplier to shorten the chain in order to maintain the
best cycling performance of your bike.
Common sense use of speed
control system:
• Do not tread in reverse while
changing speed so as not to lead
to failure and the chain falls off.
• As far as possible, do not change
the gear-speed ratio substantially
and do not change the speed in
accordance with the order.
• If the electric bike is idle for
a long time, the chain will
be changed to the minimum
keyboard tooth and the smallest
flywheel, so as to avoid fatigue of
the mechanical flexibility.
• The chain, fluted disc, flywheel,
Derailleur should be always
washed, wiped, and lubricated
(oiled appropriately).
• The derailleur should avoid the
jump-class speed change, which
will lead to rapid wear and tear.
If the size
is bigger
than,15mm,
the chain is
too