ICON ATV08, Руководство пользователя

Страница: 18 / 32

ICON EV Manual Operation and adjustment ATV08 18
Disk brake type brake
Adjustment method of the brake shoe block:
1. Loosen the positioning bolt;
2. Adjust the distance of the shoe block through
the left and right knob; when the shoe block
adjusts the left knob of the bolt, the distance
of the brake shoe block is increased, and vice
versa it becomes small (as shown in the
disk chart).
3. Depending on the circumstances, the braking
is adjusted.
Brake cable
The brake cable of the flat handle
• The bifurcation situation of the internal line
should be avoided, so a tail sleeve had best be
covered on the line end.
• The brake cable should be regularly taken out
to be oiled, to avoid too large resistance arisen
from rust.
• The brake cable in a linear way has the best
function, and if it must be bent, the turning
with a small arc should be avoided as far
as possible.
• The length of the brake cable is based on the
principle that it will not be stuck when the
handlebar turns left or right to the limit.
1 Stroke adjusting bolt
2 Position adjusting bolt
3 Rocker arm
4 Permanent seat
5 Brake shoe block
6 Shoe block adjusting bolt
7 Permanent seat of brake line