5
BRIDGE MODE SETTING SCREEN
5-67
8. [Port Settings] Menu
M
Transceiver 1 (TRX1)/Transceiver 2 (TRX2)(continued)
"General Setting"
t
SQL Type …………………
Select the squelch signal type.
(Default: Single SQL)
• Single SQL: The squelch signal is separately input.
• Superimposed SQL: The squelch signal is superimposed on the speaker
input line (A3 terminal).
y
SQL Logic …………………
Select the squelch detection type.
(Default: High)
• High:
The squelch line becomes “High” while receiving signal. (Active High)
• Low: The squelch line becomes “Low” while receiving signal. (Active Low)
u
Power Detection …………
Select “Enable” to detect the power status (ON/OFF) of the radio.
(Default: Disable)
i
Power Detection Signal Logic
Select the logic to detect the power status (ON/OFF) of the radio.
(Default: High)
• High: Becomes High when the radio’s power is ON. (Active high)
• Low: Becomes Low when the radio’s power is ON. (Active low)
[Port Settings]–[Transceiver 1 (TRX1)/[Transceiver 2 (TRX2)]
* Appears only when “Enable” is selected in [Power Detection].
** Appears only when “Enable” is selected in [Serial Communication].
*
**
**
**
