Icom MR-1010RII, Инструкция по эксплуатации

Страница: 20 / 72

15
2
BASIC OPERATION
■
Bearing settings
The radar bearing interface accepts NMEA, N+1,
AUX, or COG data format and the bearing can use a
magnetic or true north type. When a true north type
bearing is used, the variation from magnetic north
can be adjusted on 0.1˚ steps.
D
Setting the bearing input
1. Push [MENU]/[ ].
2. Push [
t
] or [
u
] to select the Initial menu.
3. Push [
p
] or [
q
] to select the “Bearing Input ”
item.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [
t
] or [
u
] to select the bearing data source.
L
NMEA, N+1, AUX, GPS, or GPS-L is selectable.
L
GPS and GPS-L uses the COG (Course Over
the Ground) data as the bearing. However, if
the vessel's speed is less than 3 knots, direction
accuracy falls. Moreover, the position accuracy or
the current actual course may vary, therefore the
radar may display incorrect direction.
6. Push [ENTER]/[ ] to save the setting.
7. Push [MENU]/[ ] to exit the Menu screen.
D
Setting the bearing type
1. Push [MENU]/[ ].
2. Push [
t
] or [
u
] to select the System menu.
3. Push [
p
] or [
q
] to select the “Bearing Mode”
item.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [
t
] or [
u
] to select the Bearing mode.
L
True and Magnetic north type are selectable.
L
All displayed bearing readouts show the selected
bearing type.
6. Push [ENTER]/[ ] to save the setting.
7. Push [MENU]/[ ] to exit the Menu screen.
T: True north
M: Magnetic north
(MENU
w
System
w
Bearing Mode )