Icom MR-1010RII, Инструкция по эксплуатации

Страница: 38 / 72

7
OTHER FUNCTIONS
■
TLL function
The TLL (Target Latitude and Longitude) function
marks the target on the display or outputs its data to
an external unit.
D
TLL setting
1. Push [MENU]/[ ] to display the Menu screen.
2. Push [
t
] or [
u
] to select the System menu.
3. Push [
p
] or [
q
] to select the “TLL Mode” item.
4. Push [ENTER]/[ ] to enter the option selection
mode.
5. Push [
t
] or [
u
] to select an option.
L
“Output,” “Symbol,” and “Output & Symbol” are
selectable.
6. Push [ENTER]/[ ] to save the setting.
7. Push [MENU]/[ ] to exit the Menu screen.
D
Information box
1. Move the cross-line cursor onto a mark.
2. Push [ENTER]/[ ] to display the information.
• The target identification number, position, bearing
(BRG), distance (DIST), Time to go (TTG), and day/
time (Day/Time) are displayed.
L
To close the information box, move the cursor to
anywhere there is no mark, then push [ENTER]/
[ ].
(MENU
w
System
w
TLL Mode )
D
Operation
Select a target on the screen that you want to mark.
1. Move the cross-line cursor onto a desired place.
2. Hold down [ACQ•TLL]/[ •TLL] for 1 second to
mark the point.
L
When the “Output” or “Output & Symbol” is selected
in the “TLL Mode” in the System menu, outputs the
position information from the NMEA output terminal.
L
When the “Symbol” or “Output & Symbol” is selected
in the “TLL Mode” of the System menu, displays the
target mark.
3. Repeat steps 1 and 2 until you complete marking
places.
L
Hold down [CLEAR]/[ ] for 1 second to delete
the selected mark.
TLL symbol
33