Icom MA-510TR Скачать руководство пользователя страница 51

Страница: 51 / 64

CONNECTIONS AND INSTALLATION

■

Fuse replacement

One fuse is installed in the supplied DC power cable. If the fuse blows or the transponder

stops functioning, track down the source of the problem, repair it, and replace the

damaged fuse with a new one of the proper rating.

Fuse rating: 3 A

■

Connecting to the transceiver

Connect the transponder and a transceiver using the accessory cable. After connecting,

an Individual DSC call can be made to the AIS target using the transponder without

entering the target’s MMSI code. (p. 31)

Connect each lead to the appropriate lead as follows.

See the instruction manual of each for transceiver’s connecting instructions.

The following transceivers can operate with this function. (As of November 2019)

IC-M605/IC-M605EURO/IC-M506/IC-M506GE/IC-M424G/IC-M400BB/

IC-M330/IC-M330GE/IC-M330G/IC-M220

IC-M605/IC-M605EURO

•NMEA 1 OUT (+) or NMEA 2 OUT(+): To NMEA IN (+).

•NMEA 1 OUT (–) or NMEA 2 OUT(–): To NMEA IN (–).

•NMEA 1 IN (+) or NMEA 2 IN (+):

To NMEA OUT (+).

•NMEA 1 IN (–) or NMEA 2 IN (–):

To NMEA OUT (–).

IC-M605/IC-M605EURO’s rear panel view

NMEA 1 IN (+)

NMEA 1 IN (–)

NMEA 1 OUT (+)
NMEA 1 OUT (–)

NMEA 2 OUT (+)
NMEA 2 OUT (–)
NMEA 2 IN (–)
NMEA 2 IN (+)

IC-M506/IC-M506GE/IC-M424G/IC-M400BB/

IC-M330/IC-M330GE/IC-M330G/IC-M220

•Listener A (Data-H) (Yellow): To NMEA OUT (+).

•Listener B (Data-L) (Green): To NMEA OUT (–).

•Talker A (Data-H) (White): To NMEA IN (+).

•Talker B (Data-L) (Brown): To NMEA IN (–).

NOTE:

•When an external GPS receiver is not connected, RMC, GSA, and GSV sentences

are only output from the internal receiver.

•When the NMEA sentences are input from an external GPS receiver, all the

sentences*, as described to the left, are passed to the output terminal.

*The external GPS receiver requires the GBS sentence output.

Содержание MA-510TR

































































Результаты поиска

Содержание MA-510TR

Отзывы:

Бренды по названию

Популярные бренды

Icom MA-510TR, Инструкция по эксплуатации

Результаты поиска

Содержание MA-510TR

Отзывы:

Бренды по названию

Популярные бренды