Icom MA-510TR Скачать руководство пользователя страница 38

Страница: 38 / 64

OTHER FUNCTIONS

Stopping navigation

1. Push [NAV] to stop navigation.

•“Stop navigation. Are you sure?” is displayed.

The transponder can also stop navigation by pushing

[CLR] when no target is selected.

2. Select “OK,” and then push [ENT].

•The transponder stops to navigate.

Resetting navigation

The transponder resets the start position, and restarts

navigation from your current position.

The function works only when the transponder is receiving

valid GPS signals.

The function cannot work while in the MOB mode, or when

the transponder does not navigate.

1. Open the “Navigation settings” screen.

[MENU] >

Navigation settings

2. Push “Reset navigation” to reset the start position.

•The popup screen is displayed.

3. Select “OK,” and then push [ENT].

•The transponder resets the start position, and restarts

navigation from your current position.

NOTE:

•An alarm sounds, and a popup screen is displayed

when the vessel arrives at or near the destination. To

stop the alarm and navigation, push any key.

•An alarm sounds, and a popup screen is displayed

when the vessel goes off course.

When the vessel comes back on course, the alarm

automatically stops.

•If the transponder is turned OFF during navigation, the

transponder continues navigation.

Selecting on the plotter display:

Push [◄] or [►] to select an AIS target or waypoint.

•A target box is displayed around the selected target.

(p. 13)

2. Push [ENT] to display the Menu window.

•The Menu window is displayed.

3. Select “Navigate to,” and then push [ENT].

•“Start navigation. Are you sure?” is displayed.

4. Select “OK,” and then push [ENT] to start navigation.

•The target’s current position is set as a waypoint.

•The AIS and Highway screen is displayed, and the

transponder starts to navigate

Содержание MA-510TR

































































Результаты поиска

Содержание MA-510TR

Отзывы:

Бренды по названию

Популярные бренды

Icom MA-510TR, Инструкция по эксплуатации

Результаты поиска

Содержание MA-510TR

Отзывы:

Бренды по названию

Популярные бренды